Casella-cel CEL-310 Bedienungsanleitung PDF herunterladen (Seite 26)

The Reader downloads the measurements before it downloads

Time History. If there are errors during the download of Time

History data, the Reader will store the measurements and show

Trace Error in the message line at the bottom of the display.

DO NOT REMOVE the Dose Badge until the Reader shows

Reading ok to indicate a successful download.

Once the measurement download has been completed, the

Reader will display the last measurement.

4. Download data from the other Dose Badges used for the job in

the same way.

4.7 Print Stored Measurements

The currently displayed measurement can be printed by a serial printer

connected via the Reader unit’s RS232 Port. The communications

protocol used by the Reader is as follows:

Baud 38,400

Parity None

Data Bits 8

Stop Bits 1

1. Press to display the Main Menu.

2. To print the current measurements, use to select Print

Current Data (see the fold-out diagram at the back of this

handbook).

3. Press to confirm the choice.

The data from the current measurement will be printed.

4. To print all stored measurements, use to select Print All

Data (see the menu diagram at the back of this handbook).

5. Press to confirm the choice.

The data from all measurements will be printed.

If there are no measurements in the memory, the Reader will

display a No Measurements message.

Operation

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 44 45

Keine Kommentare

Casella-cel CEL-310 Bedienungsanleitung Seite 26